Hufschmied Zerspanungssysteme GmbH

Booth number 821

www.hufschmied.net

About us

Process-optimized tools by Hufschmied allow more economical time usage and up to 30% faster processing. Highest quality without reworking at up to 25% higher life-time of our material optimized tools. Many renowned companies from the segment of tool and mold design increase their productivity and quality of manufacture with Hufschmied. Furthermore Hufschmied embodies more than 25 years of experience in development and manufacture of machining tools. By early specialization in processing plastic materials, fiberglass materials and carbon fibers Hufschmied has reached a top position in Europe for machining new materials. And this is a benefit to all our customers. Engineering as value-adding service: Machining new materials presents many tweaks allowing massive reduction of processing expenses while increasing product quality without reworking. Hufschmied Engineering is a new service to optimize your manufacturing processes in three steps – Analysis, Optimization and Implementation.

Products and services

First class solutions for best machining results. Innovative tools for even greater cost-efficiency in manufacturing. Renowned aerospace companies, all major automotive manufacturers and suppliers as well as renowned manufacturers in the fi eld of medical technology apply our process-optimized tools for highest processing quality - More precision, faster, sustainable – process-optimized tools by Hufschmied.

The comprehensive product spectrum for economically machining plastics.

Further reading

Engineering as value-adding service

The ideal strategy to produce in series faster and without reworking.

Further reading

Hard-Line, Graphit-Line, Plastic tools

Further reading

Address
Hufschmied Zerspanungssysteme GmbH
Edisonstr. 11 d
86399 Bobingen
Germany

Phone: +49 8234 9664-0
Fax: +49 8234 9664-99
Internet: www.hufschmied.net
E-mail: Send message

Contact person

Ixchel Velazquez
Head of Division
Phone: +52 155 4433-4000
E-mail: Send message

Representative
HUFSCHMIED HERRAMIENTAS INNOVADORAS
Av. Universidad No.1134, Piso 1 Oficina 38
03330, Ciudad de México
México

Phone: +52 155 4433-4000
Internet: www.hufschmied.net
E-mail: Send message

News & Innovations

Monobloc-Ultrasonic-Blades for Honeycomb

Hufschmied Zerspanungssysteme GmbH, specialist for material-optimised high performance processing, is extending its tool range with the newly developed SC blades for particularly smooth and clean ultrasound cutting. Compared to conventional blades, these newly-developed monobloc blades achieve an increase in cutting performance of up to 100% combined with an increase in oscillation amplitudes of up to 10-fold. Thus, Hufschmied ultrasound blades allow for a highly precise separation of material without fraying together with a multiple of feed rates and less tool wear. These SC blades have been developed in cooperation with the Karlsbad firm of Weber Ultrasonics AG, who will be offering these blades in sets to customers with their perfectly matched SonoTrans systems. No chips as with milling, no burnt edges as with laser cutting: Hufschmied Zerspanungssysteme GmbH, in cooperation with Weber Ultrasonics AG, is introducing a series of innovative SC monobloc blades onto the market, with which even challenging materials such as honeycomb, films, skins, CFRP and GFRP fabrics can be cut through extremely efficiently and with the utmost precision.


Further reading
Milling graphite without changing tools

As a new tool for the processing of graphite, HUFSCHMIED has introduced the Graftor® into its range. It makes tool changes redundant when processing graphite electrodes: Roughing and finishing are achieved in one single processing step whilst exerting only a low cutting force on the often extremely delicate pins of the electrodes. Thus, manufacturing time and expense are massively reduced. As with all of Hufschmied’s graphite milling cutters, Graftor® is equipped with a patented nano-crystalline diamond coating. This means that even the smallest of milling tools remain sharp against the abrasive graphite and achieve surface qualities that are up to two grades higher.


Further reading
Roughing and Finishing with the BlockBuster

With the newly-developed BlockBuster tool range, Hufschmied is showcasing tools excelling in low cutting forces and decreased thermic stress. Both characteristics favour the very cost-effective milling of all manners of sheet materials in model-making. Roughing and smoothing can be achieved without the need to change tools and is achieved in one single processing step. For the machining of plastics block material, BlockBuster is available with large diameters of up to 25 mm and lengths of up to 300 mm.


Further reading

Click here if you notice an image that violates copyright or privacy rights.

Get in contact