About us

Schüssler Tool Holding Systems - Made in Germany - founded and family owned since 1970. Premium high-quality tool holders in every relevant standard versions and interfaces – HSK / SK / MAS-BT and PSC (Corum / Polygonshank). All holders are fine balanced G2,5 at 25.000 min-1. Various types: ER standard collet chucks, mini ER and high precision HPC ER collet chucks with double clamping force, shrink fit holders (4,5° / 3° / slim / extra long) and with anti-pullout safety, weldon, shell mill holders and combi holders, thread shank adapter, ABS, morse taper adapter etc. Schüssler is well known for especially HSK manufacturing in perfection and as a specialist in shrink fit technology (holders and shrink fit units). Schüssler combines competitiveness and quality in best cost / performance relation. With more than 1.000 tool holders per day Schüssler is one of the market leaders in Germany and Europe. Committed to quality and customer´s value.

Products and services

Schüssler Tool Holding Systems - Made in Germany.
Product range of premium tool holders:

HSK-A 63/ A 80/ A 100/ A 40/ A 50/ F 63/ E 32/ E 40/ E 50
SK 40 / SK 50
MAS-BT 30 /40 /50
PSC (Corum / Polygonshank) C4-5-6-8
All holders are fine balanced G2,5 at 25.000 min-1.

Various types:

ER Standard collet chucks
Mini ER and high precision HPC ER collet chucks with double clamping force 
shrink fit holders (4,5°/3°/slim/extra long) and with anti-pullout safety 
shrink fit extensions
shrink fit units
End mill holders Weldon
Shell mill holders and Combi holders 
Thread Shank Adapter
ABS holder
Morse taper Adapter etc.

Nearly all of the variations are available with Cool Tool.
 

SCHÜSSLER - Shrink fit holder HSK-A 63

Hawk Eye - HPC high precision ER collet chuck - HSK-A 63, SK, MAS-BT

Hawk Eye - HPC high precision ER collet chuck with double clamping force compared to regular ER collet chuck and runout of <=0,003 (subject by using collet with 0,002 repeatable accuracy). Availbale range HSK-A 63, HSK-A 100, SK 40, SK 50, BT 40, BT 50, PSC shank

Several shrink fit holders HSK-A 63 and SK 40

SCHÜSSLER - Various shrink fit tool holders

Address
Karl Schüssler GmbH & Co. KG
Bahnhofstr. 108
72411 Bodelshausen
Germany

Phone: +49 7471 9590-0
Fax: +49 7471 9590-90
Internet: www.k-schuessler.de
E-mail: Send message

Contact person

Rolf Schütz
Key Account Manager
Phone: +49 171 9199186
E-mail: Send message

News & Innovations

News & Innovations

SCHÜSSLER TITANIUM shrink fit holder with anti-pullout safety - best solution for HPC milling in hard material like Inconel, Hastelloy, Hardox and in Titanium and high alloyed Aluminum. Only an easy surface has to be grinded on the cutting tool (free drawing / no licence) and you can use the patented holder like regular standard shrink fit holder and make your cutting process 100% sure without additional licence or cutting tool system.

SCHÜSSLER HAWK EYE the high precision ER collet chuck is an alternative to several other types of holders like hydraulic or e.g. shrink fit chucks. It achieves a double clamping force compared to a regular ER collet chuck. By using a high-quality ER collet with 0,002 repeatable accuracy this holder achieves a runout of <=0,003 at 2,5 x D. No special “system” required! As well an option for trochoidal milling.
 

Click here if you notice an image that violates copyright or privacy rights.

Get in contact